Professional Electrical Solutions for Everett

Licensed, bonded & insured. Serving Everett for over 20 years.

Get A Free Quote (206) 260-1981

Licensed, Bonded & Insured — Serving Everett Since 2003

From historic downtown Everett properties to businesses near the Boeing Everett Factory, Konsker Electric provides commercial and residential electrical services at scale across Snohomish County's largest city.

Everett's industrial heritage and proximity to the waterfront mean many older buildings require comprehensive electrical upgrades to meet modern commercial and residential codes.

Our crews work daily near Boeing Everett Factory and downtown Everett and throughout the Greater Everett neighborhood, so we know the local permit office, the common service-drop layouts, and the building stock — Everett features historic Victorian homes, industrial conversions, and modern apartments. Every installation is tailored to the property's specific age, wiring type, and electrical load requirements — backed by full warranty and code-compliant permits.

Electrical Services in Everett

Panel Upgrades

200-amp service upgrades for modern electrical demands. We replace outdated panels with UL-listed equipment that meets current NEC and Washington State code.

Residential Wiring

Complete home wiring, rewiring, and circuit additions. All work is permitted, inspected, and warrantied for your protection.

Commercial Electrical

Tenant improvements, warehouse lighting, and commercial buildouts. Licensed for projects up to 600V with full permit management.

Safety Inspections

Comprehensive electrical system evaluations identifying code violations, fire hazards, and efficiency improvements.

Popular services in Everett: Commercial Electrical, Panel Upgrades, Whole-Home Rewiring, EV Charger Installation, Emergency Service.

More About Electrical Services in Everett, WA

Everett's Licensed Electrical Contractor

Finding a reliable electrician in Everett shouldn't be a gamble. Konsker Electric is fully licensed, bonded, and insured through Washington State L&I — with an A+ BBB rating and five-star Google reviews from Greater Everett homeowners. From historic downtown Everett properties to businesses near the Boeing Everett Factory, Konsker Electric provides commercial and residential electrical services at scale across Snohomish County's largest city.

Everett's industrial heritage and proximity to the waterfront mean many older buildings require comprehensive electrical upgrades to meet modern commercial and residential codes. This is why we use only contractor-grade materials rated for Pacific Northwest conditions on every Everett installation.

Everett features historic Victorian homes in the Rucker Hill and Grand Avenue districts, industrial conversions near the waterfront, and modern apartments along Broadway and Evergreen Way. Each property type presents unique electrical challenges — from aging wiring in older homes to ensuring new construction meets current NEC and Washington State code. Our licensed electricians assess each property individually, recommending solutions matched to the building's age, wiring type, and the homeowner's electrical demands.

Commercial Electrical in Everett

Our commercial electrical division handles projects from tenant improvements to ground-up construction throughout Everett's industrial corridors and downtown business district. We install 3-phase power distribution, commercial-grade LED lighting systems, emergency and exit lighting per IBC requirements, and high-voltage equipment connections up to 600V. We coordinate with general contractors and building inspectors to keep projects on schedule, handling all permitting, inspections, and as-built documentation.

For Everett's manufacturing tenants and aerospace suppliers near the Boeing campus, we provide machine disconnects, motor controls, transformer installations, and capacity upgrades that support production schedules without unplanned downtime. After-hours and weekend work is available so we can cut over circuits without interrupting your operations.

Panel Upgrades in Everett

A 200-amp panel upgrade replaces your home's outdated electrical distribution center with modern, arc-fault and ground-fault protected breakers. Our installations include a new meter base, weatherhead, and service entrance cable when required. We coordinate directly with Snohomish County PUD for the service disconnect and reconnection, handle all L&I permit filings, and schedule the required inspection — so you don't have to manage any of the logistics.

Many Everett homes built between 1920 and 1970 still run on 60 or 100-amp panels with Federal Pacific, Zinsco, or Pushmatic equipment. These panels are widely recognized as fire risks and can void homeowner's insurance. We replace them with code-compliant 200-amp Square D, Siemens, or Eaton panels and provide written documentation for your insurer and any future buyers.

Whole-Home Rewiring in Everett

Our whole-home rewiring process starts with a detailed assessment of your existing wiring, noting circuit counts, wire gauge, insulation condition, and grounding integrity. We then design a new wiring layout that adds circuits where needed — dedicated lines for kitchen countertop outlets, laundry, HVAC, and home office equipment. All work is permitted through Washington State L&I and inspected before final closeout.

For Everett's older Victorian and Craftsman homes, we use minimally invasive fishing techniques to route new copper wiring through existing wall cavities, preserving original plaster, trim, and hardwood floors wherever possible. Knob-and-tube and aluminum branch circuits are removed completely — not just abandoned in place — so your insurance carrier has no remaining concerns.

EV Charger Installation in Everett

With Snohomish County PUD offering some of the cleanest hydroelectric power in the country, Everett is one of the best places in Washington to drive an EV. We install 240V Level 2 chargers — Tesla Wall Connector, ChargePoint Home Flex, Wallbox Pulsar Plus, and Grizzl-E — typically delivering 25–35 miles of range per hour. Every install includes a load calculation, dedicated 40 or 50-amp circuit, weatherproof outdoor enclosure when needed, and a permit through L&I. Most installations are finished in a single day.

Emergency Electrical Service in Everett

Power loss, sparking outlets, burning smells from a panel, or a tripped main breaker that won't reset — these are not problems that wait for business hours. Konsker Electric dispatches licensed electricians across Everett, Mukilteo, and South Snohomish County after hours. We arrive in fully stocked trucks ready to diagnose service entrance damage from wind storms, replace failed breakers, restore power after a vehicle-versus-pole incident, and make safe any condition that threatens your property. Call (206) 260-1981 any hour.

Schedule Your Free Estimate

Contact Konsker Electric today for a free estimate on any residential or commercial electrical project in Everett, WA. Call (206) 260-1981 or request a quote online. Licensed, bonded, and insured — serving Everett and the greater Seattle metro area for over 20 years.

Frequently Asked Questions — Everett Electrical Services

Do you offer emergency electrical services?

Yes, Konsker Electric provides emergency electrical service for urgent situations like power loss, sparking outlets, burning smells from panels, or exposed wiring. Call (206) 260-1981 and we'll dispatch a licensed electrician as quickly as possible to address the situation safely.

How much does it cost to rewire a house?

Whole-home rewiring in the Seattle metro area typically ranges from $8,000 to $30,000+ depending on the home's size, number of circuits, accessibility of existing wiring, and whether walls need to be opened. Konsker Electric provides free detailed estimates so you know exactly what to expect before work begins.

Can you install an EV charger at my home?

Yes. We install Level 2 (240V) EV chargers for all major vehicle brands. Installation includes running a dedicated circuit from your panel to your garage or carport, mounting the charging unit, and ensuring everything meets NEC and local code requirements. Most installations are completed in half a day.

How do I know if my electrical panel needs an upgrade?

If your panel is over 20 years old, uses fuses instead of breakers, or you're experiencing frequently tripped breakers, it likely needs upgrading. Modern homes draw significantly more power than older panels were designed to handle. A licensed electrician can assess your panel's capacity and recommend the right upgrade to support your household's electrical demands safely.

What should I do during a power outage?

First, check if your neighbors also lost power — if so, contact your utility provider. If the outage is limited to your home, check your main breaker and reset any tripped breakers. If the problem persists, call a licensed electrician. For frequent outages, consider a whole-home generator installation for uninterrupted backup power.

Need a Licensed Electrician in Everett?

Contact Konsker Electric today for professional electrical services throughout Everett, WA and the greater Seattle metro area.

Get A Quote Call (206) 260-1981